So here is the Electrical Junior Engineer Job Description :

As Junior Engineer, performs duties and responsibilities of an Operations Principal Engineer who is responsible for the operation of control room switches and equipment to effect proper conditions in transmission and distribution of power in major substations, including but not limited to the following:

a)    Executes and supervises the operation of control devices and high voltage equipments in the transmission and distribution of 230KV electric power to substations and power plants.

b)    Ensures that standard operating procedures are followed as load dispatcher for safe, efficient and optimal continued operation of power in the Luzon Grid.

c)    Checks/reviews the accuracy of the daily operating log, operating/change orders and analyzes the same.  Recommends ways and means to the Superintendent-A in optimizing operation.  Coordinates with the Line Foreman/Line Crew in switching operation during the outages.  Provides information to Technical Services Group and assists in troubleshooting/repair works.

d)    Performs periodic ocular inspections, repair and testing of all substation equipments and makes report accordingly.

e)    Preparation of monthly power billings, enercon reports and monthly/quarterly/semi-annual/annual operational reports.  Assists in the preparation of work orders, monthly operating expenses, budget and load forecasts.

Preparation of designs for lighting and power plans, specification of breaker sizes and over current protections with the use of all applicable codes and standards.

• Conducts field inspection on laid asphalt mix and verify conformance to approved specifications.
• Conducts inspection on the construction of ditches, gabions, retaining walls, wing walls, parapet walls and other grouted rip rapping works.
• Conducts inspection on the installation of concrete posts and guardrails.
• Prepare and review documents for project close-out requirements.
• Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to Company
• Supervise the implementation of punchlist(balance of works) issued by client to conform with the established Client standards and specifications.
• Prepare QC Inspection reports and monthly accomplishment reports.

You may want to check our Sr QA/QC Engineer Job Description and QA/QC Manager Job Description

• Conducts line checking on installed items, issue punch lists and verify accomplishment prior to endorsement for testing.
• Conducts pre-qualification of welders for pipe welding works.
• Conducts inspection on installation of Fans and Blowers including pre-fabrication and initial testing.
• Prepare Inspection reports for accepted and rejected activities.
• Conducts receiving inspection on critical materials prior to installation.
• Checks billings of subcontractors and monitors daily accomplishment.
• Attend to coordination meetings and address problems concerning installation problems.
• Prepare monthly reports.

You can also check our Job Description for QA/QC Manager working in a Plant.

• Generate Non-conformance Reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
• Prepare and Maintain Quality Manual for the Organization.
• Generate work instructions, company procedures for use by the organization and submission to client.
• Conducts Internal Quality Audit.
• Conduct and prepare analysis of generated NCRs, complaints, audit results.
• Created process flowcharts for various activities and departments.
• Arrange with third party inspectors for necessary testing.
• Implement Quality System to the Project.
• Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
• Arrange company documents for Client accreditation.
• Prepare Quality Inspection and Test Plan (ITP) for submission to Saudi Aramco.
• Review Mill Test Certificates. ( For Production Related Works only )

Sr. Planning Engineer

Coordinate with Tendering Departments Engineers to come up with a competitive and technically sound bid proposal.

Responsible for preparation of all construction schedules for tender and ongoing projects, time scaled logic diagram using primavera project planner software and construction progress chart showing S-Curves and manpower histogram in excel & prepare cash flow plan, shop drawing schedule and procurement schedule. Update Master Project Schedule (P3), Monitor and update the actual progress of work. Prepares monthly Project Management Construction Reports on all projects for submittal to the Construction Operation Manager

Sr. Planning/Cost Engineer

Study tender documents consisting of contract conditions, drawings, B.O.Q and specification. Responsible for monitoring and control of ongoing projects.

Project Planner

Responsible for preparation of overall electro-mechanical construction schedules, time scaled logic diagram using primavera project planner software and construction progress chart showing S-Curves and manpower histogram in excel & prepare cash flow plan.